Votre panier est vide

Detecteur optique de poussiere Sharp GP2Y1010AU0F


Ce capteur équipe les systèmes de climatisation pour détecter les particules de poussière dans l'air. Il est basé sur l'absorption de lumière infra-rouge par la poussière. La sortie analogique est proportionnelle à l'absorption. Il est livré avec son câble.

5/12 Il est livré avec l'adaptateur DFR0280 qui permet de brancher facilement le câble.

Description en anglais :

The Sharp Optical Dust Sensor (GP2Y1010AU0F) is especially effective in detecting very fine particles like cigarette smoke, and is commonly used in air purifier systems.
 
An infrared emitting diode and a phototransistor are diagonally arranged into this device, to allow it to detect the reflected light of dust in air. 
 
The sensor has a very low current consumption (20mA max, 11mA typical), and can be powered with up to 7VDC. The output of the sensor is an analog voltage proportional to the measured dust density, with a sensitivity of 0.5V/0.1mg/m3.
 
For your convenience, DFRobot ship this sensor with a 6-pin, 1.5mm pitch mating connector and cable.
 
To link this sensor with Arduino, a 150ohm resistor and a 220uF capacitor are required. 
 
 
Specification
  • Supply voltage: 5-7V
  • Operating temperature: -10-65 Celsius degree
  • Consumption current:20mA max
 
Documents

Documentation de l'adaptateur DFR0280 :

                     INTRODUCTION

Sharp GP2Y1010AU Dust Sensor requires some wiring on the breadboard and a list of components to make it Arduino compatible. This has turned down several people due to the thin wires of the sharp sensor making it yet another addition to the drawer. We've listened your requests and created this adapter so you can get started right away on your project. 

If you are planning to assemble several sensors for your air station and need to have it working soon, this adapter will save time on circuit building and debugging. Not only this but it is also fully compatible with our sensor connectors, so you can directly connect it to our expansion boards all together with our large range of sensors.
 

APPLICATIONS

  • Air monitoring.
  • Air filtering.
  • Air quality station.

SPECIFICATION

  • Volatge:  5V
  • Size:  27x27mm
  • Integrated LED for power indicator.

On-board silkscreen:
  • A is for analog pin
  • D is for digital pin

 

DOCUMENTS

SHIPPING LIST du DFR0280

  • Dust Sensor Adapter  x1
  • Adapter cable  x1
  • Digital cable  x1
  • Analog  cable  x1
Contenu SEN0144 + DFR0280
  •  1 x Capteur Sharp GP2Y1010AU0F Dust Sensor
  •  1 x Cable pour ce capteur
  • 1 x Adaptateur DFR0280 cable Sharp vers une sortie analogique et une numérique. ( voir ci-dessus)

 


  • Prix :
  • Modèle : SEN0144
  • En Stock
  • Fabricant : DFRobot

Share |